52225A WTSCR400WH-7 Air Compressor
Tag No.：52225A
Model：WTSCR400WH-7
Name：Air Compressor
Technical Specifications:
|
Name |
Screw Air Compressor |
|
Model |
WTSCR400WH-7 |
|
Exhaust volume |
69 m³/min |
|
Exhaust pressure |
0.7 MPa |
|
Motor rated power |
315KW |
|
Motor rated speed |
1475r/min |
|
Voltage/frequency |
6KV/10KV/3/50Hz |
|
Motor protection class/insulation class |
IP23/F |
|
Drive mode |
Direct |
|
Noise value at 1 meter |
86 ± 3dB(A) |
|
Cooling method |
Water cooling/Air cooling |
|
Cooling water volume |
34m³/h |
|
Lubricant oil quantity |
260L |
|
Carrying amount of export gas lubricating oil |
1 to 3ppm |
|
Automatic start method |
Y-△/high voltage direct start |
|
Outlet size |
DN125 |
|
Outlet compressed air temperature after cooling |
Inlet water temperature +10 ℃ |
|
Total weight |
8300/9100/9600Kg |
|
Length |
4000mm |
|
Width |
2200mm |
|
Height |
2300mm |
Product introduction:
This air compressor is an oil injected screw air compressor. Two-stage compression has higher compression efficiency and lower energy consumption than one-stage compression. It can work under four pressure levels between 0.7~1.25MPa and supply air of 51.9 ~ 69m3/min. The motor can adopt 380V or 6kV/10kV, and the cooling method can adopt air cooling or water cooling. It can be used for instrument air compressor, drive source air compressor or main air compressor of air separation plant. If it is used as instrument air, oil filter and refrigeration dryer or suction dryer are generally required to reach the dew point of - 20℃ or - 40℃.
For more information, please contact us by email sales@wintekgroup.com .
Key Words: Air Compressor, Screw Air Compressor, Instrument Air Compressor, Oil Injection Screw Air Compressor
